TDIM1_4_User Manual_1
23
You can activate the LED by pressing the push button on the back of the
attachment part. In order to avoid damaging the casing, do not use too much
force when pressing the push button.
In order to activate or deactivate the LED, press the push button 3 times
in quick succession. Your setting adjustment will be confirmed as
follows:
▪
1 long, low tone followed by 1 short, higher tone indicates that the
LED is activated
▪
1 long tone followed by 1 short tone in the same pitch indicates that the
LED is deactivated
4.9. After use
If you have stopped using your InnoMake, switch both attachment parts on
the shoes off.
In order to switch off, you can leave the attachment parts inserted in your
shoes or remove them from the compartments in your shoes first. Go ahead
and find out what works best for you.
When removing an attachment part, pay attention to the raised waves on the
side surfaces. In order to avoid breaking the casing, do not pull the
attachment part out with a grip on the top edge of the attachment.
The following questions will help you prepare your InnoMake after use and
before the next use:
•
Are both attachment parts switched off?
See: Switching off in section 4.1
•
Are the attachment parts or the shoe compartments dirty after use?
See: Cleaning in section 6.2
•
Are the attachment parts wet?
Содержание InnoMake v.1
Страница 1: ...User manual Version 03 2021...