Tec-Innovation InnoMake v.1, Руководство пользователя

Страница: 10 / 36

TDIM1_4_User Manual_1 10
An LED is installed on the left next to the push button, which provides you
with colour feedback on the battery status when the battery is charging. Of
course, InnoMake also provides you with acoustic information on the battery
charge level. Refer to section 4.3.
Information on application will follow in section 4.
Battery charger with micro-USB connector
The packaging of your InnoMake contains a battery charger with micro-USB
connector that is intended for charging your InnoMake. The USB cable has a
length of 1 metre. It should be kept out of the reach of children.
Charging the battery is described in section 4.2.
2.2. Control elements and interfaces
Your InnoMake has a micro-USB port . The micro-USB socket is located on
one side of the attachment part, as described in section 2.1. The USB port is
intended for charging InnoMake with the micro-USB connector supplied by
us. Do not connect any other devices to your InnoMake.
Charging the battery is described in section 4.2.
A push button is attached to the back of the attachment part as a control
element. This push button can be used to
▪
switch your InnoMake on and off,
press: 1x long, see section 4.1
▪
choose between pre-set measurement ranges (1.5 or 4,0 metres),
press: 1x short, see section 4.6
▪
check the battery charge level,
press: 2x short, see section 4.3
▪
activate the LED for better visibility,
press: 3x short, see section 4.8