TDIM1_4_User Manual_1
16
There are also application restrictions in case of extreme natural influences,
such as e.g. flooding, fire, hail or temperatures above 40°C and below
-5°C, as well as hazardous environments, such as e.g. in constructions sites
or workshops.
The detailed permissible environmental conditions can be found in the
technical data in section 7.
InnoMake does not detect holes in the ground and steps going
downwards. It only detects objects rising from the ground.
4.
Application
4.1. Switching on / off and operational state
Switching on
In order to switch an attachment part on, hold the push button on the back of
the attachment part for at least 2 seconds. An ascending audio signal
indicates when the attachment part is switched on. There is a continuous
vibration in the shoe during the audio signal. In order to avoid damaging the
casing, do not use too much force when pressing the push button.
Both attachment parts must be switched on separately.
Operational state
The operational state of InnoMake is indicated by a single signal tone that
sounds about one second after the
ascending ‘switching on’ audio signal.
You can also recognise the operational state by the fact that you can change
the distance measurement range by briefly pressing the push button on the
back of the attachment part. Signal tones will sound when this setting is
changed, but in a different pitch.
The default measurement range setting upon delivery is 1.5 metres.
Содержание InnoMake v.1
Страница 1: ...User manual Version 03 2021...