TEC Infra-red STERLING, Руководство пользователя

Страница: 18 / 31

you keep your grill covered with a heavy duty vinyl
cover at all times when it is not in use. Your dealer
should have TEC covers designed specifically for
your grill for this purpose. Further, do not attempt
to operate your grill in the open air while it is
raining. Finally, after you use the grill, close the hood
as soon as you turn the burners OFF so that, if it
rains, the burners will not be exposed to direct
rainfall.
■ If you find standing water in your grill (because of
exposure to rainfall, etc.). examine the ceramic
burner surfaces for evidence of possible water
soaking. If the ceramic appears to be wet, remove the
burners from the grill and turn them upside down to
empty any water from the burner box. After draining
all the water, place the burners indoors and allow
them to dry thoroughly. Also, empty any water
standing in the grill’s Drip Tray. Then, reinstall the
burners. After testing for gas leaks around all fittings
as described in the section entitled
GAS LEAK TEST
on page 10, you should be able to resume normal
use of your grill.
Cleaning
CAUTION:
ALWAYS ALLOW THE GRILL TO COOL
BEFORE CLEANING. DO NOT ALLOW WATER TO MAKE
CONTACT WITH THE BURNER SURFACE, AT ANY TIME.
Drip Tray
Remove soiled foil and rinse with soap and water. Re-
cover the Drip Tray with foil.
Heat Shield
Remove soiled foil and re-cover. If necessary, the Heat
Shield may be removed for further cleaning.
Cooking Grids
Leave the Cooking Grids in place for 5-10 minutes while
the burners are on HIGH and the hood OPEN. The
Cooking Grids may also be removed and cleaned with a
brass or stainless steel bristle brush and soapy solution.
Standard oven cleaners may be used for further cleaning.
Rinse the Cooking Grids thoroughly with clean water
before using.
Replacement Parts
If you need Replacement Parts or Accessories, contact
your TEC Authorized Dealer. See Appendix C of this
manual for a listing of Replacement Parts and
Accessories.
Maintenance and Cleaning
continued
17