Teamco SNOWBLAST 9600A, Руководство оператора

Страница: 61 / 78

OPERATION
9
600A 04/0
8
Operation Section 4-25
OPERA
T
ION
11. DISCONNECTING THE SNOW BLOWER FROM THE TRACTOR
Before disconnecting the implement, the PTO must be disengaged and auger rotation at a complete stop.
Move the implement to a level storage location and lower the implement to the ground. If the implement is not
resting securely on the ground, block the implement up securely before attempting to disconnect it from the
tractor.
Use extreme care to keep feet and hands out from under the implement and clear of any pinch points when
disconnecting the implement from the tractor.
Never stand or allow another person to stand between a running Tractor and the Unit when
disconnecting the Implement from the Tractor 3-point hitch. Always shut the Tractor off
completely and set the parking brake before attempting to disconnect the Implement pins
from the Tractor hitch.
10.1 Shutting Down the Implement
Tractor and Snow Blower
To shut down the implement, first, bring the
tractor to a complete stop then slow down the
snow blower by reducing the engine speed
before disengaging the PTO. Wait for all rotating
motion to stop before proceeding to drive or shut
down the tractor.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to
the ground, shut down the engine, remove the
key, and wait for all motion to come to a complete
stop before exiting the tractor.
OPS-SB-0020
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
(S3PT-15)
2008 Teamco Inc.