Teamco SNOWBLAST 9600A, Руководство оператора

Страница: 57 / 78

OPERATION
9
600A 04/0
8
Operation Section 4-21
OPERA
T
ION
9.1 Foreign Debris Hazards
If you hit a solid object or foreign debris, stop the implement and tractor at once. Immediately idle the engine
speed and disengage PTO. Wait for all rotating motion to stop, then raise the implement and move the tractor
and implement off the object. Inspect the area and remove, or mark the location of the debris. Inspect the
condition of the implement and make any needed repairs immediately. Make sure the
fans are
not damaged
before resuming operation.
Always wear your seat belt securely fastened and only operate the tractor and snowblower with the ROPS in
the raised position. If the tractor or snow blower hits a tree stump or bump, a sudden movement could throw
you off of the seat and under the tractor and snow blower. The seat belt is your best protection from falling off
the tractor and the ROPS provides protection from being crushed during a tractor roll-over.
9. OPERATING THE TRACTOR AND SNOW BLOWER
THE OPERATOR MUST COMPLETELY UNDERSTAND HOW TO OPERATE THE TRACTOR AND SNOW
BLOWER AND ALL CONTROLS BEFORE ATTEMPTING TO OPERATE.
The operator must read and
understand the Safety and Operation Sections of the snow blower and tractor operator’s manuals. These
manuals must be read and explained to any operator who cannot read. Never allow someone to operate the
snow blower and tractor without complete operating instructions.
Before starting any
snowblowing
operation, the operator must become familiar with the area to be snow
blowed and any obstacles and hazards contained within to ensure safety to the operator, bystanders, and
equipment. Special attention should be paid to foreign debris, rough terrain, steep slopes, and passersby
and animals in the area. OPS-SB-0015
Many varied objects, such as wire, cable, rope, or chains, can become entangled in the
rotating parts of the Implement. These objects could then swing outside the housing at
greater velocities than the
fans
. Such a situation is extremely hazardous and could
result in serious injury or even death. Inspect the area for such objects before working in
the area. Remove any such objects from the site. Never allow the implement to contact
such objects.
(STL-6)
Remove all foreign objects and debris. If objects
are too big to remove, mark them clearly and be
sure to prevent the implement from contacting
them.
OPS-SB-0016
2008 Teamco Inc.