32
33
10.2 Battery Saving
The dealer can turn on or turn off this function by programming. If the
battery saving function is on, 10 seconds after the radio doesn't
receive any signals or no operation is being conducted, the radio
enters battery saving mode. When a signal is received or any opera-
tion occurs, it exits battery saving mode automatically. The automatic
battery saving function decreases the power
consumption.
10.3 Low Battery Warning
Low battery warning sounds and LED flashes red when the battery
power goes below a certain value, and you need to recharge or
change the battery.
10.4 Voice Annunciation of Channel Number
The dealer can turn on or turn off this function by programming. While
switching to another channel, you can hear the voice annunciation of
the current channel number.
10.5 Busy Channel Lockout (BCL)
Busy Channel Lockout can prevent you from interfering other radios
that using the same channel.
Press the PTT button when the channel is busy, the radio with BCL
function active will make warning sound and prohibit transmitting. To
stop the warning sound, please release the PTT button and the radio
returns to receiving mode.
10.6 Remote Kill
The dealer can turn on or turn off this function by programming. When
the radio receives the call of remote killing code, it enters remote killed
mode, in which it cannot transmit, or cannot transmit and receive
unless it receives remote reviving order or is programmed by PC soft-
ware.
10.7 CTCSS/DCS
The dealer can set CTCSS/DCS tones on radio channels, which
enable you to ignore (not hear) calls from other irrelevant parties who
are using the same channel.
When you receive a signal that has a tone different from the one set
on your radio, you will not hear the signal. Likewise, signals that you
transmit will only be received by parties whose CTCSS/DCS tones are
the same as yours.
Note:
Using a CTCSS/DCS channel doesn't mean your calls are private. If
other parties' CTCSS/DCS tones are identical with yours, they can
hear your calls.
10.8 DTMF
The dealer can turn on or turn off this function by programming. Only
when the radio receives programmed DTMF code (3~10 digits), the
squelch will be activated. Usually every two-way radio has a unique
code. Calls from the radios whose codes are not programmed will not
be heard.
The dealer can also program group code on the radio. When receiv-
ing the signal with proper DTMF code, squelch will be activated, and
call can be received and LED flashes orange.
To manually deactivate the squelch, press monitor key or the side but-
ton set as instantaneously monitor.
The dealer can program that squelch turns off after a certain time and
LED turns dim.
If DTMF auto reply has been programmed, the calling radio will
receive confirming signal.
If DTMF signal reminder has been programmed, it rings when receiv-
ing the proper code.
10.9 KDC 1200 Signaling
The dealer can turn on or turn off this function by programming.
Receiving Signal:
When receiving the signal consisting of your ID and fleet code,
squelch will be activated, and call can be received and LED flashes
orange.
To manually deactivate the squelch, press monitor key or the side but-
ton set as instantaneously monitor.
Transmitting Signal:
If the PTT ID on the channel you select has been set with KDC 1200,
KDC 1200 signal will be transmitted when making a call.
10.10 5 Tone Signaling
The dealer can turn on or turn off this function by programming.
5-Tone-Signaling has 7 coding formats: CCIR, ZVEI1, ZVEI2, DZVEI,
EEA, PZVEI, and EIA.
Receiving Signals
When receiving a proper 5 tone signal, squelch will be activated, and
call can be received and LED lights orange.
To manually deactivate the squelch, press monitor key or the side but-
ton set as instantaneously monitor.
The dealer can program that squelch turns off after a certain time and
LED turns dim.
If auto reply has been programmed, the calling radio will receive a con-
firming signal.
If signal indication has been programmed, it rings when receiving the
proper 5 Tone signal.
GB
GB
pt-6200.qxp 03.05.2006 14:11 Seite 33
