28
29
5 Basic Operation
Switch On
Switch on the radio by turning the Power/Volume switch clockwise
until a click is heard, then the radio will be in the state of stand by and
you will hear a beep if the dealer has set it.
Adjust Volume
Press the button preset as monitoring or canceling squelch to listen to
the background noise and rotate the Power/Volume switch to adjust
volume.
Select a Channel
For setting the channel 1 - 16, rotate the channel selector. You will
hear voice from the speaker while receiving proper signals.
Make a Call
To make a call, press PTT, and speak in normal voice and please keep
your mouth 1~2 inches away from the microphone.
Receive a Call
Release the PTT button to receive a call. Your dealer can set CTCSS,
DCS, DTMF, KDC1200 and 5 Tone signaling on you radio channels by
PC software. If you select a channel that has been preset with the tone
signaling, you will not hear any other calls except those from your own
system.
6 Programmable Buttons
The dealer can program the Side Button 1 and Side Button 2 as one
of the following auxiliary functions.
> None (No Function)
> Automatic Dialing
> Key Lock
> Key Lock and Backup
> Instantaneously Monitor
> Scan
> Scan + Temporarily Delete
> Cancel Squelch
> Instantaneously Cancel Squelch
> Temporarily Delete
> CALL 1
> CALL 2
6.1 Automatic Dialing
Press and hold the PTT button, and press the side button that has
been set as automatic dialing to transmit the stored DTMF code.
Release the automatic dialing button and then speak to the micro-
phone with the PTT button still pressed.
6.2 Key Lock
1) Press and hold the side button set as key lock for 1 second to acti-
vate or inactivate key lock. While Key Lock is active, the following
keys are locked:
Channel Selector, Scan button, Scan + Temporarily Delete button,
Temporarily Delete button.
2) If the side button has been set as Key Lock and Backup, Key Lock
will remain active after the radio is turned off and turned on again. If
Backup function has not been set, Key Lock will be canceled after
turning on the radio again.
6.3 Monitor/Cancel Squelch
Monitor, Instantaneously Monitor, Cancel Squelch, and Instantaneous-
ly Cancel Squelch functions can enable you to listen to the signals
unable be heard while in normal operations, r can be used to adjust
the selected channel's volume.
Monitor:
Press the monitor button once to turn off CTCSS, DCS, DTMF,
KDC1200, and 5 Tone signaling, and press it again to return to normal
operation.
Instantaneously Monitor:
Press and hold the monitor button to turn off CTCSS, DCS, DTMF,
KDC1200, and 5 Tone signaling, and release it to return to normal ope-
ration.
Cancel Squelch:
Press the button once to listen to background noise, and press it again
to return to normal operation. Instantaneously Cancel Squelch: Press
and hold the button to listen to background noise, and release it to
return to normal operation.
6.4 Scan
While in scanning, the radio checks every channel and stops on the
channel on which a signal is detected until that signal disappears. If
the delay time between signal disappearing and continuing scanning
has been preset, the radio will remain on that channel in the delay time
even receiving any signals at that time. Only when there are two chan-
nels added in the scan list and the scan function has been activated,
the radio can start scanning.
1) Press the button set as Scan or Scan + Temporarily Delete to start
scanning.
2) The radio will start scanning from the current channel and scan
channel one by one in the consequence of channel No. and the LED
flashes green.
3) When a signal is detected on a channel ( DTMF, KDC1200, and
5-Tone signaling is off while scanning), scanning pauses and LED
lights green.
GB
GB
pt-6200.qxp 03.05.2006 14:11 Seite 29
