Design and function
MMA welding
299-020100-TWD01
18.03.2016
41
5.7.7
Expert menu (MMA)
To change the advanced setting parameters, hold down the "Welding parameters" button for
2 seconds after selecting the welding process.
The following diagram shows the setting options.
ENTER
EXIT
NAVIGATION
2s
2s
Figure 5-19
Display
Setting/selection
Hotstart current
Hotstart current setting (50 % to 200 %)
Hotstart time
Hotstart time setting (0,1 s to 20,0 s)
Arcforce correction (setting -10 to 10, factory setting 0)
• Increase value > harder arc
• Decrease value > softer arc
Pulse current
Setting range 1% to 200%, ex works: 142%
Pulse balance
Percentage of time from pulse cycle Tpuls for pulse current
Setting range 1% to 99%, ex works: 30%
