Machine description
– quick overview
Machine control
– Operating elements
16
299-020100-TWD01
18.03.2016
4.3
Machine control
– Operating elements
Figure 4-3
Item Symbol
Description
0
1
Welding data display (3-digit)
Displays the welding parameters and the corresponding values- See 4.3.1 chapter
2
Welding procedure/power-saving mode push-button
---- MMA welding
-- TIG welding (non-latched operating mode)
TIG welding (latched operating mode)
Signal light green: HF start (contactless) switched on (ex works)
Signal light red: Liftarc (contact ignition) switched on
STBY
Press for 2 s to put the machine into power-saving mode. To reactivate,
activate one of the operating elements- See 5.8.2 chapter
3
Select welding parameters button
This button is used to select the welding parameters depending on the welding process
and operating mode used.
4
Welding parameter setting rotary dial
Setting currents, times and parameters.
5
AMP
Main current signal light
Imin to Imax (1 A increments)
6
AMP%
Secondary current (TIG)
Setting range 1 % to 200 % (1 % increments). Percentage of the main current.
7
sec
Down-slope time (TIG)
0.00 s to 20.0 s (0.1 s increments).
8
sec
Gas post-flow time (TIG)
Setting ranges: 0.1 s to 20.0 s (0.1 s increments).
9
Pulse welding (average value pulses) signal light
On: ------ Function switched on
Not on: -- Function switched off
Flashing: Parameter selection and frequency setting
:
