Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
11
TKG HC 1002 R - 130306
Assembly page 11/56
Fax +32 2 359 95 50
•
Comb hair into the required style. Position clipper between the sideburns and the ear. Make
sure the outer edge of the blade is against the hairline. With the outline of the hair as your
guide, slowly move the clipper around the ears (7). For the back of the neck and the
sideburns, hold the clipper upside down (8), and move downwards holding it against the
skin at the length desired. If necessary, insist on the reluctant hair.
•
When you get used to your hair clipper, you will be able to make layers simply by changing
the length of the combs in function of the cutting zone. This handling asks for a special
dexterity in order to obtain a correct result.
CUTTING A BEARD
•
Lead the appliance against the grain of the beard.
•
Comb the beard hair so that it stands as high as possible, all in the same direction.
•
Put the desired comb attachment on the appliance.
•
Switch on the appliance and cut the beard.
Cutting the outlines of the beard
•
Remove the comb attachment from the appliance.
•
Hold the appliance in diagonal position with the front side pointing away from you.
•
Start with the chin and cut backwards.
•
Follow the chin line and cut the longer hair at the outside of the beard.
Styling the beard
Hold the appliance vertically in front of your face, with its front side pointing away from you.
Start with the shortest areas of the beard and cut the hair directly under the beard line moving
down.
Thinning and sharpening
Bring the beard hair in the desired shape.
Hold the appliance with its front side pointing away from you and cut the hair tips by moving
down.
CUTTING MOUSTACHE
With comb attachment
•
Comb the moustache so that it is as vertical as possible.
•
Put the desired comb attachment onto the appliance.
•
Hold the appliance horizontally in the hand with its front side pointing at you.
•
Cut the moustache by moving down.
Without comb attachment
Put your fingers on the upper lip, so that the hair of the moustache is away from the skin.
Cut the hair by moving up.
Then cut the hair by moving down to level possible length differences.
To obtain the desired outline above the upper lip, hold the appliance vertically towards the
cutting direction and move sideward.
