1 SQUELCH
- 0-9
At the value 0, the squelch function is off. The higher the number,
the stronger the signal has to be to unmute the speaker for the
signal to be audible.
2 POWER
- LOW/HIGH
Please note: with the TeCom-DB-C, only the LOW tx power is
available due to governmental regulations.
LOW: 0.5 W
HIGH: VHF (5 W) / UHF (4 W)
3 SCAN MD
- CO / TO / SE
The available channel scan modes are:
TO : Time-Operated-Scan
The scan pauses for a certain time on an occupied channel and
then continues regardless if a signal is present or not.
CO : Carrier-Operated-Scan
The scan pauses as long as a signal is present. Once the
signal ceases, the scan will be continued.
SE : Search-Scan
The scan function stops on an occupied channel. The radio
remains on the first channel where a signal has been detected.
4 LAMP MD
- AUTO / ON / OFF
The settings for the background light are:
AUTO : the LCD light is automatically turned on after pushing a key
ON
: the LCD light is constantly on
OFF
: the LCD light is constantly off
5 KEYLOCK
- MANUAL / AUTOMAT
Once keylock is activated, only the PTT key (13), the emergency call
key (12) and the On/Off switch (2) are active. All other keys are
locked. The keylock mode is indicated by the key symbol, located in
the bottom right corner.
MANUAL
: activate/deactivate the keylock by pressing the
STD key [
STD
] (10).
AUTOMAT
: the keylock function is automatically activated,
30 seconds after the last entry. To deactivate the
automatic keylock mode, press the STD key [
STD
] (10).
14
15
English
English
6 TOT
- OFF / 30 - 270 s in 30-seconds-steps
The Time-Out-Timer function restricts the transmission time in the
range of 30-270 seconds in 30-second-steps.
7 VOX LVL
- OFF/ LEVEL 9
Setting of the VOX sensitivity. On level 1 (lowest sensitivity), the
signal has to be the strongest to start signal transmission.
8 R CTCSS
- OFF / 01-50
CTCSS receipt code (see page 66)
9 T CTCSS
- OFF / 01-50
CTCSS transmission code (see page 66)
10 COLOUR LIGHT
1 / 2 / 3
background light: 1 = light blue / 2 = deep blue / 3 = green
11 STEPS
- 5 / 6.25 / 10 / 12.5 / 25 kHz
Please note: this function is only available in the HAM version -H.
12 BEEP
- ON / OFF
13 WID/NAR
- WIDE / NARROW
Please note:
in the -C version, only the narrow bandwidth
(NARROW, 12.5 kHz) is available.
14 OPN MSG
- OFF / DC VOLT / MESSAGE
The greeting message is displayed when turning the radio on.
OFF
: no text
MESSAGE
: „WELCOME“
DC VOLT
: actual battery current level in Volts
15 BCLO
- OFF / Carrier / CT/DQT
Transmission Blockage on occupied channels
OFF
: blockage off
Carrier : blockage with signal carrier
CT/DQT: blockage with CTCSS/DCS codes
16 CH.MDF
- CHANNEL / NAME / FREQ.CH / FREQ
Please note:
the display option
FREQ. is only available in the -H
version.
CHANNEL
: channel number
NAME
: channel name, as programmed
FREQ.CH
: channel number and frequency
FREQ.
: channel frequency
17 CH.NAME
(channel name) -
^
,
_
,
-
,
`
,
a-z
,
A-Z
,
/
,
0-9
,
:
,
;
,
<
,
=
,
>
,
?
,
@
,
[
,
]
A max. of seven symbols can be used; switch with the A/B key [
A/B
] (8)
to the next digit and confirm your entry with the menu key [
MENU
] (6).
TeCom-DB-c-h_manual5:Layout 1 06.01.2012 12:14 Seite 14
