12
13
FM Mode
With the LDA-100 you can also listen to FM radio stations. To switch between the
DAB mode and the FM mode press the MODE button ( 3 ). The present mode is
indicated on the right side of the display.
Should the radio not immediatly find a FM radio station, set the desired frequen-
cy with the tuning buttons UP ( 7 ) and DOWN ( 8 ). Pressing the UP button once
increases the frequency by 0.05 MHz. To decrease the frequency press the
DOWN button. To increase or decrease the frequency at a faster rate, hold the
UP or DOWN button for at least 2 seconds.
To scan the frequency band for available stations use the AUTO button ( 2 ). To
scan the band in the upper direction press the AUTO button once. To scan the
band in the lower direction, press the AUTO button for approximately 2 seconds.
To improve a weak FM signal you can change the FM audio mode from stereo
to mono by pressing the SEL button ( 5 ). This reduces the noise a little bit.
Storage of a Station
The LDA-100 can store a maximum of 5 FM and 5 DAB frequencies. Recall and
storage of frequencies are performed with the buttons
F1
-
F5
( 11 - 15 ). Each
one of these five buttons can store a DAB station and a FM station. To store or
recall a station of a particular mode ( DAB or FM ), the radio has to be set to the
according mode.
To store a desired station, set the right mode ( DAB or FM ) and select the stati-
on you wish to store. Now, press one of the five preset buttons
F1
-
F5
( 11 - 15 )
for approximately 2 seconds until the display reads “
preset # stored
”, where #
indicates the number of the selected preset.
To recall a stored station, simply press the according preset button
F1
-
F5
( 11
- 15 ).
Recall of Program Information
To recall information about the selected station, use the INFO button ( 4 ).
Depending on the mode ( DAB or FM ) and the selected station, there are diffe-
rent informations available, e.g. type of the program ( news, music, traffic infos,
etc. ), frequency, signal strength, time and date, signal type ( mono or stereo )
and radio text. You scroll through these informations by repeatedly pressing the
INFO button.
Reset to Default Settings
To erase all settings turn off the radio with the ON / OFF button ( 1 ). Next, turn
the radio on while you hold the SEL button ( 5 ) for approximately 2 seconds. The
display reads “
system reset
” . The radio scans the DAB band for available sta-
tions. This function can only be performed at the radio and not with the remote
control.
A system restart is sometimes necessary when you change the position or loca-
tion of the radio. Furthermore, the number of available DAB stations in your area
will probably increase in the future and an update needs to be performed.
Specification
Range of frequency
: FM 87.5 - 108 MHz
DAB Band III 174.928 - 239.200 MHz
Display
: LCD with 2 Dot Matrix and backlight function
Speaker
: 3’’
Output Power
: 1.8 W
Headset connection
: 3.5 mm Stereo
Extern speaker connection
: Chinch
AC Power Supply
: 220 - 240 V / 50 - 60 Hz
DC Socket
: DC 12 - 13.2 V / 0.5 A, 5 mm
Antenna connector
: F-Jack
Dimensions
: width 249 mm x height 135 mm x depth 195 mm
Weight
: 1874 g
Memory Presets
: 10 ( DAB - 5 / UKW - 5 )
Optional Accessory
DC Cigarette-Lighter-Adaptor ( item no. CB6228 ) / 12 Volt
Subject to technical modifications
DAB Radio manual_2.qxp 17.05.2005 12:34 Page 12
