16
Display
When on
Z
After the display appears as above, it will show the input source
status.
Playback source screen (when CD)
When no disc is available
NO DISC
Display example: stopped
TRACK
8
22
68:25
Total number of
tracks on disc
Total playback time
(minutes: seconds)
Display example: playing back
When a disc is playing or paused, press the DISPLAY button to
change the display as follows.
TRACK
7
1
0:02
Number of track
being played
Elapsed time of track
being played
(minutes: seconds)
TRACK
7
1
2:36
Number of track
being played
Remaining time of track
being played
(minutes: seconds)
REMAIN
TRACK
7
1
68:23
Number of track
being played
Remaining disc time
(minutes: seconds)
T.REMAIN
Playback source screen (when not CD)
The playback source screen will appear after turning the unit on as
well as after about seven seconds pass without operation when a
setting screen is open.
The input signal format or volume is shown to the right of the play-
back source. Press the DISPLAY button on the remote control to
change what is shown.
Display examples
Playback source information screen
Stopped
USB
CHECK
Playback source
Shown when the connection is being checked
Playing back
USB
PCM
44.1k
Input signal format
Sampling frequency
Press the DISPLAY button on the remote control.
Volume display
USB
−45.5
dB
Volume
Playback source name
The name of the selected source is shown.
The names on the display correspond to the selected connectors as
follows.
The names in parentheses appear when switching.
USB (USB)
USB port
COAX (COAXIAL)
RCA COAXIAL digital audio input connector
OPT (OPTICAL)
OPTICAL digital audio input connector
Input signal status
The input source signal status is shown.
CHECK
The connection is being checked.
