
10
Fig6-1 Open logo Fig6-2 “Initial Install” menu
Fig6-3 Setup dialog box Fig6-4 “Channel Search” menu
2) Press OK key, another dialogue box will pop up on screen as shown in Fig6-3. It’s
recommended to choose “Yes” for auto setup at the first time. Choose “No” to exit Setup.
3) Once you choose auto setup, “Channel Search” menu will be displayed on screen as
shown in Fig6-4 and the unit will automatically search the channels. Wait until the search
completed. The found channels will be automatically stored. When finished, the first found
TV channel will be displayed.
7. Digital TV
7.1 Basic Operations
Once channel search is completed, you can start to watch digital TV channels and radio
broadcasts. Some basic operations are taught in this chapter.
7.1.1 Switching On and Off
Whenever you are not using the unit, press the POWER key on the remote control to switch it to
standby mode. You can also press it to startup the unit.