Teac HDVR845, Руководство пользователя

Страница: 38 / 51

34
Installation
Press the key on the remote control to enter the Main Menu, choose the Installation
option and press key. Then you can press the keys on the remote control to
select a submenu. Press the key you can return to the Main Menu, or press the key
to leave, and then the changes that have been done will be stored. Here is some information
about submenu.
The Installation function allows you to:
MENU
OK UP/DOWN
EXIT
1
1
2
2
3
3
4
Auto Scan
Manual Scan
System Info
Factory Reset
How to select the functions listed above in the Installation function page:
Select 'Installation' in the 'Main Menu'.
Press the keys until the item you want is highlighted.
Press the key.
UP/DOWN
OK
Auto Scan
If your receiver is connected to the aerial and TV, you can automatically scan channels without
entering any other information.
Before starting the scan, a box asking you to confirm what you want to do will appear.
Press the key, and the set-top box will begin to search through channel 6 in VHF to
channel 69 in UHF, and the TV and Radio channels it finds will be listed separately on the
page.
If you choose EXIT, you will go back to the Installation menu page.
OK
Note: In this function all channel information stored before such as favourite settings
will be removed.
Auto Scan
CH 35 586 MHz
:
Scan Progress
Scanned Channel 6 Scanning
:
TV Channels 4 Audio Channels 2
ABC HDTV ABC DIG Radio
ABC TV Melbou ABC DIG Jazz
ABC2
ABC TV
: :
Signal Level
Signal Quality
Auto Scan
CH 35 586 MHz
:
Scan Progress
Scanned Channel 6 Scanning
:
TV Channels 4 Audio Channels 2
ABC HDTV ABC DIG Radio
ABC TV Melbou ABC DIG Jazz
ABC2
ABC TV
: :
Signal Level
Signal Quality
Warning
In Auto Scan all the channels
stored before and private
settings will be cleared please
confirm to start
,
,
.
OK EXIT