Teac HDVR845, Руководство пользователя

Страница: 24 / 51

20
Mount / Un-Mount USB Device
A USB disk must be mounted before it can be used. Don’t try to use any PVR functions at the
very moment when the USB device is connected, wait a while until you see the prompt
message “USB device attach successful!” (see section
on Page 20).
All the USB disks must be un-mounted before you can unplug it, please make sure all the
PVR operations such as recording, time-shifting, and playback are stopped before you un-
mount it (see section on Page 42 for un-mount operations in detail), otherwise
the file system on the disk may be damaged and can't be recognized by the unit again.
Alternatively, you can press the Yellow button on the remote control to Un-Mount all USB
devices.
How to connect you USB disk to the
unit
HDD Status
Note:
HDD Status
1.When the USB disk is newly connected, the first partition detected will be marked
as the “Default Partition”, you can change the “Default Partition” in HDD Status
menu (see section on Page 42).
2.The unit will remember the “Default Partition” you last changed.
This unit supports HDD with various partitions (volumes), all the partitions of the HDD in
FAT32 file system will be detected and mounted automatically when it is connected, but each
time there is only one partition is set as “Default Partition”. All recordings and time shifting will
be stored in the Default Partition.
Do NOT try to unplug the disk or shut down the mains while the unit is in PVR functions such
as recording, time-shifting or playback, and make sure the disk is already un-mounted before
you unplug it, otherwise the file system may be damaged! Please kindly note this unit can't
mount a damaged disk until it's recovered by the unit or a computer (see below section for
details).
Partitions
Damaged Disk
PVR Operations
You can directly connect the USB Flash Memory Stick to the USB port in the rear. When using
a USB Hard Disk, please make sure you have connected the external power supply to the
Hard Disk before you connect it to the USB port.
How to connect your USB disk to the unit