– –
18
The Development Kit Demonstration Software
The development kit includes software that is used to configure and control
the module through the Programming Dock. The software defaults to the
RC Configuration tab when opened (Figure 18). This window offers basic
configuration and demonstration of the module’s functionality with the
current configuration.
1. Clicking the Contact Linx, Documentation and
About labels on the left side expands them to
show additional information and links to the
latest documentation. This is shown in Figure 19.
2. The Help window shows tips and comments
about the software.
3. The active module is connected to the PC and
being configured by the software.
4. Available modules are connected to the PC but
are not currently being configured or controlled
by the PC
5. Known Modules are not currently connected to
the PC, but have either been connected to the
software in the past or have been manually entered.
6. The Memory group selects if changes are written to volatile or
non-volatile memory.
7
4
1
2
3
10
6
8
11
5
9
Figure 18: The Master Development System Software Demo and EZConfiguration Tab
12
13
14
15
Figure 19: Additional Information
Содержание HumPRC Series
Страница 1: ...HumPRCTM Series Master Development System User s Guide...
Страница 4: ......