– –
25
Development Kit Demonstration Software Example
This example shows how to configure a module using the development kit
software. The software defaults to the RC Configuration tab (Figure 27).
Install a Carrier Board onto the Programming Dock and plug a USB cable
between the Programming Dock and the PC. The software automatically
detects attached devices. The first module that is identified appears
under the Active label. This is the module that is actively controlled by
the software. Subsequent modules are listed under the Available label as
shown in Figure 28.
Figure 27: The Master Development System Software RC Configuration Tab
Figure 28: The Master Development System Software Connected Modules
Содержание HumPRC Series
Страница 1: ...HumPRCTM Series Master Development System User s Guide...
Страница 4: ......