– –
19
7. The Status Line Mask selects the input / output direction of the
individual status lines. A checked box sets that line as an input, an
unchecked box is an output. The Status Line Direction needs to be
configured before this can be changed. Settings are reflected in the
image on the right.
8. The Status Line Direction option determines if the input / output
direction of the status lines is set by the C0 and C1 lines or the Status
Line Mask
9. The Output Latching option sets the outputs as either all latched or
set by the LATCH_EN line on the module. Settings are reflected in the
image on the right.
10. The Module Identity group displays the Release and Firmware Version
of the active module.
11. The Read All button reads all of the active module’s configurations and
updates the items in the window.
12. The Write button writes the changed configurations to the selected
memory location of the active module.
13. The Set Defaults button returns the module to the factory default
configurations.
14. The Reset Module button issues a soft reset that causes the module to
reboot. This sets all volatile memory configurations to the non-volatile
default values.
15. The Show Commands button opens a larger window to view the serial
commands sent to and received from the module.
The modules are shown with three identifiers as shown in Figure 20.
1. The type of module (HumPRC™ Series)
2. The module’s local address.
3. A custom name that can be given to the module. Type a name into
the box and press Enter to apply it. This name is shown on the LCD
display on the programming dock.
Figure 20: The Master Development System Software Module Identifiers
1
2
3
Содержание HumPRC Series
Страница 1: ...HumPRCTM Series Master Development System User s Guide...
Страница 4: ......