background image

To ensure the continued high performance of your gun always clean 
and lubricate the gun immediately after use. 
Start by reading the cleaning instructions provided by the fluid 
manufacturer. 
Remove the inlet tube from the fluid container and empty the fluid 
from the gun and inlet tube.
Place the end of the inlet tube in a mixture of warm water and a 
little dishwashing detergent, then flush about 1 litre through the 
gun until it is clean. Flush again with clean water.
Inspect the inlet valve and outlet valve and ensure they are clean. 
Remove the barrel and wipe any residue from the barrel with a soft 
tissue.

Important –

 Lubricate the valves, piston O-ring, and barrel with a 

small amount of vegetable oil after cleaning and before storing the 
gun.

Periodically remove the valves and wash in warm water and 
dishwashing detergent. To access the inlet valve, unscrew the 
front of the inlet valve housing. To access the outlet valve, remove 
the nozzle and cap then use a small screwdriver to release the 
C-shaped valve retainer, being careful not to damage it. Be sure to 
refit it after cleaning as the outlet valve will not function without it.
Wipe the exterior of the gun with a damp cloth and dry off. Do not 
submerge the gun in water when cleaning.
Store the gun in a clean, dry place, out of direct sunlight. 
Recommended storage temperature is from -10° to 35° C (14° to 
95° F). Store above 0° C for optimum battery performance.
If batteries are in a low charge state, fully charge them before 
storage. Remove the batteries before storing the gun.

A.  Barrel collar

B.  Piston O-ring

C.  Nozzle holds the outlet valve and C-clip retainer in the barrel end. See exploded view.

D.  Hose entry valve housing. See exploded view.

A.  The main barrel can be easily separated from the body to aid in cleaning and maintenance by undoing the barrel collar. Do not over 

tighten the barrel collar and ensure all O-rings and felt washers are fitting correctly  when refitting.

Care, Maintenance and Storage

A

B

C

D

11

Te Pari Revolution Dosing Gun

www.tepari.com  Freephone 0800 837 274

Содержание Revolution G10

















Отзывы: