Overview of the control panel
Main screen
The current dose is prominently displayed at the top of the main screen. The top-left
corner shows a Wi-Fi icon when it is active, and the top-right corner shows the battery
level.
Power button
Click once to switch on.
Press and hold to switch off.
Prime button
Click to enter priming mode.
Menu button
Click through the options to access options for dose speed, refill speed,
Wi-Fi (G20 only), sound and tick confirmations, and the barrel change sub-
menu.
Statistics button
Shows how many doses have been administered and how much product
has been used.
Up and Down buttons
Used to increase or decrease values and change a selection when
displayed. Most setting changes are made using these buttons.
Power button
Click once to switch on. The Te Pari logo, followed by the gun model and 2 brief safety warnings will be displayed before the main
screen appears. Press and hold momentarily to switch the gun off.
Prime button
Click the prime button once. The word “Prime” will be displayed to show that the gun is in Prime mode.
Once the gun is in prime mode, pull and hold the trigger. The gun will dispense a full
barrel load and then return to the retracted position and stop. Release, then pull and
hold the trigger again to dispense another full barrel. Continue until fully primed. The
trigger may be released to stop priming at any time during the cycle.
4
Te Pari Revolution Dosing Gun
www.tepari.com Freephone 0800 837 274
