Te Pari - www.tepari.com - FREEPHONE 0800 837 274
HD3 Sheep Handler Installation Manual
1214-V1
13
Racewell HD
SHEEP HANDLING SYSTEMS
OPERATIONAL MODES
Automatic sheep handlers have 3 operational modes
Mode 1
Normal operation mode, best for most tasks like crutching, ear marking,
weighing etc This mode is the default setting at start-up It provides delayed
opening of the entry gate following an animal’s release from the crush
Mode 2
Quick throughput for weighing and drafting Best if weighing and auto-
drafting large mobs of animals Mode 2 gives you manual control of the
entry gate By supervising the operation of the entry gate throughput can be
increased because the delay in opening the gate can be reduced
Mode 3
Disables auto-catching and the auto-gate but still allows catching with the
manual controls The “eyes” must be turned off in this mode This allows most
animals to run through but lets you catch the ones you want for dagging etc
To change Modes:
Mode 1
- The default mode Whenever you
Power On
from
Off
the
Handler will be in Mode 1
Mode 2
- To go to Mode 2,
Power Off
then hold the
Hold
switch in the
Release
position for 3 seconds while turning the
Power On
Mode 3
- To go to Mode 3,
Power Off
then hold the
Hold
switch in the
Hold
position for 3 seconds while turning the
Power On
Switching
Power Off
then back
On
will return you to Mode 1 from Mode 2 or 3
Racewell HD
www.tepari.com
NZ 0800 837 274
The Hold Switch
Up to HOLD
Down to RELEASE