TE-Group Guardo Dashcam Pro, Руководство пользователя

Страница: 9 / 76

-9-
VIDEO RECORDING MODE
A camera icon is shown in the upper left corner of the display.
• When the Guardo DASHCAM PRO is connected to your cars power supply, it will start
Video recording as soon as the car engine is started. You will hear “Start Record”. It will
stop recording after the car is stopped. You will hear “Stop Record”.
•
When the Guardo DASHCAM PRO is not connected to the cars power supply it will start
Video recording as soon as the camera is turned ON.
• Press the recording button (8) to stop recording and save the files automatically.
Note:
• G-sensor: When the G-Sensor is ON (default = ON), the DASHCAM will start emergency
recording immediately after the car gets hit or brakes in case of emergency. During
emergency recording, a red triangle symbol will be shown on the right side of the
screen. You will hear “Emergency Record”.
Note:
-
Emergency recording will only detect an “impact” if the impact level is higher than
the G-sensor sensitivity set in the menu.
-
Emergency files are saved as files with name “Evenxxxx”, they will not be
overwritten during loop recording. When SD card is full with emergency records,
you will hear “Emergency Record full”.
-
Emergency recordings have a max. recording time of up to 1 minute per file.
• After an incident it can be possible to recover the video file and you will see and hear
“Recover last file?”.
•
Manual recording: You can also start recording manually by pressing the Camera
button (11) in video mode at any time. These files are also saved as files with name
“Evenxxxx”.
• Loop recording: During recording, the device will save each video file every 2, 5 or 10
minutes automatically. When the SD card is full, the device will delete the oldest video
file automatically.
• The night video recording function is turned on automatically under lowlight
circumstances when set in HDR resolution.
PHOTO MODE
A photo icon is shown in the upper left corner of the display.
•
Press the MODE button (7) 1x if you want to make pictures instead of recordings.
• Press the Camera button (11) every time you want to take a picture.
PLAYBACK MODE
A thumbnail icon is shown in the upper left corner of the display.
•
For Playback mode, press the MODE button (7) 2x.
•
Press the Camera button (11) to select a file.
•
Using the UP and DOWN buttons (10-12) you can scroll through the recordings. Press
the Camera button (11) to select a file.
• Press the Camera button (11) to start playback. Press the Camera button (11) to pause
or begin playback again.
•
To delete a file, select the file and press the MENU button (13). Press the Camera button
(11) to confirm to delete a single file or all files.