TE-Group Guardo Dashcam Pro, Руководство пользователя

Страница: 20 / 76

-20-
TROUBLESHOOTING
Problem Possible causes & solutions
Camera does not turn on.
1.
The battery is empty. Charge the battery.
2.
There is moisture condensed inside the device. Dry the
device in an environment of 18°C minimum.
3.
The device is being connected with PC. Wait until con-
nection is established.
Camera does not charge.
1.
The charger is not connected correctly to the device.
Check the USB connections.
2.
The battery performance is too low (performance of bat-
tery will drop after a few years of operation).
Camera cannot record
video’s.
1.
No SD/TF card is inserted. Insert an SD card.
2.
There might be a problem with the SD/TF card. Format
the SD card in the device and try again.
3.
The SD card is not inserted correctly. Remove the card
and insert correctly.
Image is not clear. The lens might be dirty. Clean the lens with a soft cloth.
Image is too dark/light. Exposure settings are wrong. Settings should be adjusted
in the menu.
Camera cannot connect
with PC.
The USB cable is not connected correctly to the device/PC.
Check the USB connections. Use only the supplied factory
cable.
Vertical stripes appear on
the LCD display.
Direct and bright lights might cause vertical strings on the
display. Switch off and wait at least 30 min.
LCD display is not clear. The display might be exposed under direct light. Switch off
and wait at least 30 min.
Wrong date or time is
shown on images.
1. Date or Time setting was not correct. Set the correct
date/time in the menu.
2. Date and time will be restored to the factory settings if
the power is empty from internal battery.
No image on TV. The AV or HDMI cable is not connected correctly. Check the
connection and check the input option in the TV menu.
Wrong/no LDWS/FCWS/
FCMD warnings.
1.
The automatic calibration method might not be set right.
The device needs to be reset using the reset button.
2.
Drive for minimum 15 min. to have the automatic cali-
bration set correctly.
3.
Make sure the installation is done as described on page
7.
Camera has crashed
completely: no operation
possible.
Improper operations (Inserting or removing TF Card while
recording, pressing buttons frequently and disorderly),..
might cause system failure. Please use the Reset button to
reset the device.