manualshive.com logo in svg

TE Connectivity InterReach Fusion ADCP-77-044, Руководство пользователя, Страница: 24 / 236

Поделиться
Скачать
TE Connectivity InterReach Fusion ADCP-77-044 Скачать руководство пользователя страница 24

System Hardware Description

2-4

InterReach Fusion Wideband Installation, Operation, and Reference Manual

CONFIDENTIAL

D-620616-0-20 Rev F

one Main Hub, four Expansion Hubs, and 32 RAUs (1-4-32). Multiple systems can 
be combined to provide larger configurations.

NOTE:

The Fusion Wideband One Port Main Hub (PN: FSN-W1-MH-1P 

and FSN-W2-MH-1P) configuration is a cost reduced version of the Fusion 
Wideband Main Hub and supports 

only

 one Expansion Hub (up to 8 RAUs).

The Fusion Wideband One Port Main Hub is “software locked” to 1 port 2 
fiber ports. Additional ports are disabled internally. 

Please do not attempt to 

remove the front panel fiber port plate,

 

since doing so will void the product 

warranty

.

Figure 2-1

Fusion Wideband System Hardware

Figure 2-2

Fusion Wideband One Port System Hardware

Содержание InterReach Fusion ADCP-77-044













































































































































































































































Отзывы:

Нет отзывов