IDC Hand tool RAST 2.5 and 5
©2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
12/ 55
Operation Manual
744015-5
*Trademark. Other products, logos, and company names used are the property of their respective owners.
6.2
Construction of the hand tool
The Hand tool consists of the movable handle with the guidance and the stuffer (4), the adapter (5), the
table mounting consists of the table clamp piece (2) and the bracket (3) as well as the tool head consists of
the holding fixture with connector clamping (1).
Fig. 2: Hand Tool Design (similarly)
1
Holding fixture incl. Connector clamping
2
Table clamp piece
3
Bracket
4
Guidance incl. Stuffer unit
5
Adapter
CAUTION!
Damage to property! Stuffer damage hazard!
Strictly observe to exchange the complete tool head.
The fixture including the connector clamping may only use in combination with the
appropriate provided gripper.
A combination of a holding fixture with a guidance of another type will probably crash and will
cause a damage of the stuffer!