409-35011
Rev C
12
of 54
3.
DESCRIPTION
Machine Overview
Rotating Stripping Head
The HV-CP is fitted with three blades, three cutting wheels and a mandrel. This offers many advantages,
such as precision centering, braid flaring and matched toolsets for repeatable processing. The rotating
blades cut the entire circumference of the insulation with precision.
Multi-Step Stripping
The HV-CP processes multi-layered conductors in steps that can be programmed in any desired order.
The cut parameters can be independently set and optimized for every level. The stripping machine has a
memory that accommodates different conductors and processing parameters.
Operation
1. The operation of the HV-CP is intuitive. The graphical display/touchscreen assists the operator with
setting the processing parameters
in first creating an “Article”; i.e., building a cable profile,
then setting
the run parameters, and initiating a production run. A different screen can be pulled up at any time to
make process adjustments.
2. Integrated air jets for automatic blade cleaning and an in-line vacuum to remove slugs keep the
processing area clean and efficient. A removable container is located inside the chassis for easy
waste disposal.
Specifications
Wire Cross Section (Stripping)
10 mm
2
- 120 mm
2
Increments for Incision Diameter
0.01 mm (0.0004 in)
Max. Outer Diameter
23.0 mm (0.90 in)
Increment for Stripping Length
0.01 mm (0.0004 in)
Min Diameter of Inner Conductors
6.0 mm (0.24 in)
Article Library: Max Number of Articles
1500
Maximum Outer Jacket Strip Length 80.0 mm (3.15 in)
Sequence Function: Max Number of Steps 100
Maximum Braid Strip Length
70.0mm (2.75 in)
Typical Cycle Time
30 sec
Figure 10
