Hand tool for AMP DUOPLUG 2.5™
©2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
9/ 17
Operation Manual
4-744015-6
*Trademark. Other products, logos, and company names used are the property of their respective owners.
5
Product description
The hand tool has been designed to apply connectors according to the TE specification 114-18049 with wi-
res using Insulation Displacement Technique.
It is only permitted to use the „ Hand tool for AMP DUOPLUG 2.5™ “ only for repair proposes or preparation
of samples. Do not use it for serial production.
5.1 Identification of product
For clearly identification of product the hand tool is marked with the Part number (arrow).
Fig. 1: Identification of product
5.2 Handled connectors
Following connectors according to the TE specification 114-18049 are used:
Connector
Wire specification
PN X-829868-X
PN X-829869-X
DGB I
solid wire ø0.4 mm and ø0.5 mm
bonded wire 7 x ø0.15 = 0.12 mm²
bonded wire 7 x ø0.16 = 0.14 mm²
stranded wire 7 x ø0.20 = 0.22 mm²
stranded wire 12 x ø0.21 mm = 0.35 mm²
PN X-966194-X
PN X-966195-X
DGB II
stranded wire 7 x ø0.25 mm = 0.35 mm²
