TE Connectivity FlexWave Prism, Руководство по установке

Страница: 19 / 50

RF Cable Connections
FlexWave Prism RF Modules for Prism Remote Units Installation Guide Page 17
TECP-77-141 Issue 5 • 300001744178 Rev E • November 2013 © 2013 TE Connectivity Ltd.
RF Module Cables for Dual ‐ Slot Installations
For Dual‐Slot installations, the RF cables and connectors are labeled as
MOD N TX0/RX0
and
MOD N
TX1/RX1
, where
N
refers to the bottom slot of the double‐slot installation. For example, for a
Dual‐Slot installation in a Quad‐Bay chassis, the RF cables and connectors are labeled as
MOD C
TX0/RX0
and
MOD C TX1/RX1
.
The cables and connectors have corresponding labels as shown in Table 8 on page 17 for
Dual‐Slot 40W RF Modules.
Table 8. RF Antenna Labels for Dual ‐ Slot 40W RF Modules (Top of Chassis Down)
RF Module
Cable,
RF Module
Connector,
and Remote
Antenna
Connector
Labels
Function
Slots for 40W RF Modules
(a) (b)
Dual-Bay Tri-Bay Quad-Bay
Mod D
TX0/RX0 Transmit RF power and primary receive
to/from the antenna for RF Module D N/A N/A Slots C and D
Mod D RX1 Diversity receive for RF power from the
antenna for RF Module D
Mod C
TX0/RX0 Transmit RF power and primary receive
to/from the antenna for RF Module C N/A N/A
Mod C RX1 Diversity receive for RF power from the
antenna for RF Module C
Mod B
TX0/RX0 Transmit RF power and primary receive
to/from the antenna for RF Module B Slots A and B Slots A and B Slots A and B
Mod B RX1 Diversity receive for RF power from the
antenna for RF Module B
Mod A
TX0/RX0 Transmit RF power and primary receive
to/from the antenna for RF Module A
Mod A RX1 Diversity receive for RF power from the
antenna for RF Module A
(a)
N/A indicates that the slot cannot be used for a Dual-Slot 40W RF Module
(b)
Install the Dual-Slot 40W RF Module in the lower-most slot in the chassis. If, however, if two Dual-Slot 40W
RF Modules are present, install the 2100 Module in the lower-most slot and the 1900 Module in the
upper-most slot.