TE Connectivity AT-SC, Руководство по эксплуатации

Страница: 49 / 101

Page 49 / 101 ECOC: EGC0 ; LOC: AI
528050-1 412-18876 Rev. G
CAUTION!

The crimp machine is only allowed to be used with mounted adapter and die set.

The crimp machine is only allowed to be used when it is in complete functional
condition.

When working with the Pneum. Parallel Crimp Machine AT-SC, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the Pneum. Parallel
Crimp Machine AT-SC.

Work with caution.

In cases of a machine malfunction, production must be stopped and the
malfunction must be fixed before continuing work with the machine.

Only one person is allowed to work on or with the machine.

Only trained personal are allowed to work on or with the machine.

It is only allowed to work with the specified working pressure.
- Loosen set screw of the fine thread screw.
(Fig. 8.03)
- Press and hold down the right foot pedal.
(Fig. 8.04)
- Turn the fine thread screw counter clockwise
until it bottoms out.
- Release the foot pedal. Should the machine
does not open, abort the crimp cycle by
pressing the release button.
- Turn the fine tread screw clockwise. Repeat
adjusting procedure as described above.
- Turn the fine thread screw by a ¼ of a turn
counter clockwise. (Fig. 8.05)
- Tighten set screw of the fine thread screw. (Fig.
8.03)
INFORMATION:
Push the release button immediately should the two dies not line up.
Fig. 8.05
Fig. 8.03
Fig. 8.04