1-528050-1
412-94313 Rev. A
BDA AT-65
– 01/16
Seite/Page/Página 81 / 115
ECOC: EGC0 ; LOC: AI
INFORMATION
+
To travel the full stroke of 40 mm, no tooling or adapter is allowed to be in the hydraulic
Crimp Machine AT-65.
1.
Turn on the hydraulic Crimp Machine AT-
65 with the main switch.
2.
Turn the key switch
1
to the right position
into
„Program Mode“
.
3.
To enter the calibration mode press arrow
buttons left
2
and right
3
simultaneously.
The display should show:
"KALIBR << START"
.
4.
Confirm the display by pressing the enter
button
4.
The start of the hydraulic unit indicates the
beginning of the calibration process of the
hydraulic Crimp Machine AT-65. The
calibration process establishes the head
stroke limits. As long as the calibration is
in process the display shows:
"WAIT… <<STOP"
.
#001
<
>
KALIBR
<<START
WAIT…
<<STOP
1
2
3
4
Fig. 7.2
Fig. 7.3
Fig. 7.4
Fig. 7.5
