1-528050-1
412-94313 Rev. A
BDA AT-65
– 01/16
Seite/Page/Página 67 / 115
ECOC: EGC0 ; LOC: AI
+
Do not use any oils which do not meet the above mentioned specifications.
+
Wear protective gloves and safety glasses during lubrication work. Clean the areas of skin
exposed to lubrication grease with water and soap. Change your clothes affected by
hydraulic oil
. Please pay attention to the safety instructions in the “safety data sheet” of the
hydraulic oil and the hydraulic fluid.
+
The exchange and maintenance intervals must be strictly adhered to!
+
The machine must be put out of operation with mounted adapter and safety guard.
+
Wear suitable safety shoes when transporting and dismounting the machine.
2.3
Responsibilities
The hydraulic Crimp Machine AT-65 may only be operated by suitably trained and authorized
personnel. The user must clearly define and observe the responsibilities of the personnel for
operation, set-up, maintenance and service. It is particularly important to define who is
responsible for work on the electric equipment. Such work should only be carried out by
specially trained staff.
Should the user make any changes to the machine without consulting the manufacturers or
the suppliers,
the latter will not be liable for any damage that may result.
The user of the hydraulic Crimp Machine AT-65 is responsible for making sure that all persons
involved in any way, either in the installation or in maintenance of the machine, have been
thoroughly trained on the system using the this instruction.
The user is also responsible for the training of operators and the instruction must include the
following aspects:
+
Purpose of the machine
+
Hazard zones
+
Safety rules and regulations
+
Functionality of the various components of the machine
+
Proper operation of the machine
To assure full familiarization with the system, the training must be conducted in the native
language of the operators involved.
Staff qualifications required in conjunction with the use of the hydraulic Crimp
Machine AT-65:
Installation
Set-up
Instruction
Technical personnel with language proficiency in either English or
German in addition to the native language of the operator
Operation
Through qualified personnel trained as indicated above
Maintenance
Service
Technical personnel with proficiency in English or German
The safety instructions, warnings and precautions contained in the individual chapters must
be strictly observed by all users and operators.
2.4
Designed Use
+
Realization of connections by crimping a terminal to a cable
The hydraulic Crimp Machine AT-65 is designed for use with TE approved adapters. The
adapters should only be used with the dies specified by TE. The hydraulic Crimp Machine AT-
65 with the adapter and dies should only be used for creating crimped connections up to 400
mm² cross section!
