TE Connectivity 1213819-1, Руководство пользователя

Страница: 8 / 9

409- 10058
Rev E 8 of 8
PROBLEM PROBABLE CAUSE REMEDY
Dirt, contaminants, etc, in ram area of tool Return tool to TE.
Tool is inoperative.
Crimp tool battery contacts damaged Reform the contacts.
p
Tool components are worn or damaged. Return tool to TE.
Oil level is low. Return tool to TE.
Dies stop during operation.
Air in the hydraulic system.
Pull the trigger and hold the retract button
simultaneously. Hold for approximately 10
seconds.
Crimp tool loses oil. Damaged internal seal. Return tool to TE.
Figure 4
8. RETURN
Order replacement parts through your TE Representative, or call 1.800.526.5142; or send a facsimile of your
purchase order to 1.717.986.7605; or write to:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
9. REVISION SUMMARY
S
Updated document to corporate requirements
S
Added new text to Section 4, OPERATION