409- 10058
Rev E
4
of 8
Figure 1
Release Switch
(1213819--1, --2,
and --5 Only)
Battery Powered
Crimp Tool
Battery
Lock
Battery
Cartridge
1725839--1
Trigger
Moving Die
Holder
Stationary Die
Holder
Straight--Action
Adapter
1. INTRODUCTION
Straight--Action Adapter Battery Powered Crimp Tool Kit 1213819--[ ] consists of the battery powered crimp tool
(with the Straight--Action Adapter assembly installed), as well as two rechargeable battery cartridges
(1725839--1) to power the tool. See Figure 1. Each kit has a battery charger. The battery charger part number,
its voltage, and the kit’s region of use are listed in the table on Page 3. A battery tool may have a release
switch to retract the ram as listed in the table below. The Straight--Action Adapter Battery Powered Crimp Tool
Kit 1213819--[ ] is designed to accept various crimping die assemblies that are sold separately and are
available from TE Connectivity. For crimping die set information concerning wire preparation, crimping
procedures, maintenance, inspection, and repair, refer to the applicable instructions for the appropriate
crimping die set.
Specifications are listed in Figure 2.
