409- 10058
Rev E
5
of 8
CRIMP TOOL (with Battery Installed)
Length
343 mm [13.5 In.]
Width
60 mm [2 3/8 In.]
Depth
80 mm [3 1/8 In.]
Mass/Weight (w/Battery)
1.3 kg [2.9 lb.]
Sound Level
75 dBA at 1 Meter
Vibration
< 2.5 m/s2
Hydraulic Oil
Shell Tellus
T 15
CRIMPING CAPACITIES
Maximum Crimping Force
15.6 kN [1.75 Tons]
Average Crimping Time
2 Seconds
Average Crimps Per Charge
Approximately 150
BATTERY
Charging Voltage
9.6 V
Charging Time
40 Min
Figure 2
2. RECEIVING/INSPECTION
The Straight--Action Battery Powered Crimp Tool Kit 1213819--[ ] is thoroughly inspected during and after
assembly. Prior to packaging and shipping, a final series of tests and inspections is made to ensure proper
function of the tool. The following inspection should be performed as a safeguard against potential problems
generated in transit.
1. In a well--lighted area, carefully uncrate the tool and inspect each component as it is removed from
the crate.
2. Thoroughly inspect each component for evidence of damage that may have occurred in transit. If any
of the components are damaged, file a claim against the carrier and notify TE immediately.
3. Keep this manual and all drawings and product samples with the tool for the benefit of operation and
maintenance personnel.
The crimp tool should be inspected at regularly scheduled intervals, depending on care, degree of operator
skill, the type and size of product being crimped, and environmental conditions. At a minimum, the tool should
be inspected after every 40 hours of use.
3. DIE INSTALLATION AND REMOVAL
Do not operate the tool without the Straight--Action Adapter installed. Damage to the ram or seals can result.
Do not operate the tool without a die set installed. Damage to the adapter can result.
Straight--Action Adapter Battery Powered Crimp Tool Kit 1213819--[ ] comes with the straight--action adapter
assembly already installed on the battery--powered hand tool. The only installation required is the installation of
the dies.
To avoid personal injury, be sure to exercise extreme caution when handling the crimp tool. Remove the battery before
installing or removing the dies.
CAUTION
!
CAUTION
!
DANGER
