Circuit Segment
To modify the properties of any component, double-click it and enter a new value in the
properties dialog that is displayed and then click OK.
To create a link, double-click an output port on a component, then click the input port on the
next component in the circuit.
To add a component, double-click the workspace and select a component.
To delete a component or link, click it and press the DELETE key on your keyboard.
For more information on working with circuits, see the
Modify a File
Open the appropriate RPvdsEx
fi
le.
If you are using
fi
ltered noise, the
fi
rst step is setting the
fi
lter values. If not, you can skip to
the next step.
Find
section B
, in the illustration above. By default the circuit uses a lowpass
fi
lter with a
corner frequency at 16 kHz and a highpass
fi
lter with a corner frequency at 8 kHz.
1.
2.
Noise Exposure | 70
