TDSi GARDiS 1, Руководство пользователя

Страница: 4 / 23

2
1. Introduction
Thank you for purchasing your TDSi GARDiS Controller door access control system.
There are 3 main types of GARDiS master controller, the GARDiS 1, GARDiS 2 and GARDiS 4 .
GARDiS 1 is a 1-door controller with connections for 1-2* readers. GARDiS 2 is a 2-door
controller with connections for 2-4* readers. GARDiS 4 is a 4-door controller with
connections for 4-8* readers.
The GARDiS controller is operated independently and requires no separate software
installation. Configuration of the access control system is provided to the user via an
embedded web server that can be accessed from any compatible web browser.
The GARDiS controller can operate as a master controller with up to 10** extension
modules. Extension modules include slave GARDiS controllers that can allow capacity for
up to 44 doors, I/O modules allowing the monitoring and control of equipment and
wireless IP Locks***. More information on these extension modules will also be provided in
this manual along with installation guides.
This manual will guide you through the installation of GARDiS controllers.
* The upper limit requires TDSi readers for the Reverse LRC protocol (In/Out Readers).
Limited functionality is available with this configuration.
** Licensing dongle is required to allow more doors on the system.
*** Wireless IP Locks is limited to 10 doors.
2. Information and Recommendations
In accordance with the European directive UTE C00-200 incorporating directives
2004/108/CE, GARDIS complies with the following standards:

NF EN 50081-1 governing electromagnetic radiation

NF EN 50082-1 governing electromagnetic susceptibility
Wiring Recommendations
Cables used to connect readers, network and other devices must be installed in
accordance with the Level 2 (protected environment) instructions of NF EN 61000-4-4
standard.
Installation Recommendations
This product must be installed by a qualified company. Improper installation and use may
result in risk of electric shock or fire. Before carrying out the installation, read the technical
instructions and follow the product mounting recommendations.
Mains Power Supply Recommendations
When using mains power supply, once the power is turned off, all the internal capacitors
will discharge to a safe level after 60 seconds under normal conditions. However, in the
event of a power failure, the discharge may take a much longer time and appropriate
precautions must be taken before handling the product.