AN-000240
Document Number: AN-000240
Page 9 of 23
Revision: 2.0
3
GUI
The GUI is used to display real-time plots and output numerical values of its scans.
3.1
LAUNCH GUI
1.
Plug in the USB from the Smartsonic to the computer.
2.
Open the unpacked
folder, ‘
Gui-demo-robofloor-X.X.
X’. Ensure proper firmware is flashed on SmartSonic.
3.
Launch ‘floor_demo.exe’.
4.
Hit ‘Connect’ and the detection will start.
3.2
GUI FIELDS AND WIDGETS
Figure 3-1. Robo Floor GUI Interface
1.
Connect:
Establish connection. Starts real-time sensing and data stream.
2.
Settings:
Input settings. See
Section 3.3
3.
Record:
Record the raw data anytime by checking the ‘Record’ box.
The “record.txt” can be changed to a desired name
.
1
2
3
4
5
6
7
8
