TDK-Lambda RFE1600-12, Руководство по установке

Страница: 17 / 24

5
SYMBOLS
CAUTION Risk of Electrical Shock.
Instruction manual symbol. The instrument will be marked with this symbol when it is
necessary for the user to refer to the instruction manual.
Indicates hazardous voltage.
Indicates ground terminal.
Protective Ground Conductor Terminal.
Denotes hazard. An attention to a procedure is called. Not following the procedure correctly
could result in personal injury. A WARNING sign should not be skipped and all indicated
conditions must be fully understood and met.
Denotes hazard. An attention to a procedure is called. Not following the procedure correctly
could result in damage to the equipment.
PARTS SUBSTITUTIONS & MODIFICATIONS
Parts substitutions and modifications are authorized TDK Lambda service personnel only. For repairs or
modifications, the instrument must be returned to TDK Lambda service facility.
AC INPUT
Do not connect RFE1000 units to mains supply exceeding the input voltage and frequency rating. The input voltage
and frequency rating is: 100-240V~, 50/60Hz. For safety reasons, the mains supply voltage fluctuations should not
/-10% of nominal voltage.
ENERGY HAZARD
The main output of RFE1000 units is capable of providing hazardous energy. Due to hazardous energy level
the output and connections therefore must not be user accessible. Manufacturer's final equipment must provide
protection to service personnel against inadvertent contact with output bus bars.
FUSE
Internal fuse is sized for fault protection and if a fuse was opened it would indicate that service is required. Fuse
replacement should be made by qualified technical personnel.
RFE1000 unit’s fuse ratings are described below. F101: F20A H 250Vac; F102: 6.3A 400VDC.
SICHERUNGEN: Vor Anschluss an die Netzversorgung ist die Aufstellanleitung zu beachten!
1. Absicherung: F101: F20A H 250VAC; F102: 6.3A 400VDC.
2. Die Gehaeuseabdeckung darf nur im stromlosen Zustand geoeffnet werden.
ACHTUNG: Sicherungen duerfen nur durch geschulte Service Personen getauscht werden.
OVERCURRENT PROTECTION:
A readily accessible branch circuit over-current protective device rated 20A max. must be incorporated in the
building wiring.
Überstromschutz
Eine leicht zugängliche Vorsicherung mit 20A max. pro Eingang muss in der Hausinstallation vorgesehen werden