Multicast DNS: Resolves Host Name to IP Address in networks that do not include
a local server. By default, this is enabled.
Modify: Click this button to open the window shown below
5.5.2 LAN
➔
Configure
➔
Modify Page
If user is logged in, clicking the “Modify” button on the LAN
➔
Configure window,
the following window appears. On this window, you may enter new values for
the LAN settings. The available fields depend on the selection of “DHCP Assigned
/ AUTO IP” or “Static IP”
Changes to these setting will not take place until the “Apply” button is clicked
Note: After changing the LAN settings, the web browser will automatically close.
Re-open it using the new address
TCP/IP Mode: This selects how the module gets its network settings. Select either:
DHCP Assigned / AUTO IP: If this mode is selected, the network server uses
DHCP to assign the IP address, subnet mask, default gateway and DNS server.
Since the server assigns these, they are disabled (gray) on the web page. If the
server cannot make the assignment, the module shall revert to the Auto IP
method described in section 3.4
In this mode, the user may only change the hostname and description.
Static IP: If this mode is selected, the IP address, subnet mask and default gateway
must be entered in the window fields. The settings must be compatible with the
requirements of the network server. These settings do not change even if the
module is moved to different LAN connections.
In this mode, DNS server fields are disabled (gray)
In this mode, the user can also change the host name and description.
Fig 9. DHCP Settings
25
Содержание HFE1600 SERIES
Страница 39: ...39 ...
Страница 40: ...IA817 04 01A Z0020951 40 ...