21
1.4.4.2
Installation Steps
1.
Attach connection plates, one on each side of the power supplies, using 12 pan head screws,
12 helical spring-lock washers and 12 plain washers as illustrated in Figure 23.
Figure 23: Three 150V‐600V Units Connection Plates 2U Assembly
2.
Loose and remove six flat head screws from power supply’s back side as illustrated in
Figure 24.
Figure 24: Power supply’s back side screws removal
Connection Plate 2U
Plain Washer, No. 10, Stainless Steel
Helical Spring‐Lock Washer, No. 10, Stainless Steel
10‐32 x 5/16 Pan Head Screw, Stainless Steel
Tightening torque: 25.4‐31.7 Lbf‐inch (2.87‐3.58Nm).
M3 x 6 Flat Head Screw
