17
3.
Connect two paralleling cables from top unit M connector to bottom unit S connector as
illustrated in Figure 18.
Figure 18: Three 60V‐100V Units Paralleling Cable Connection
4.
For load wires with a diameter smaller than or equal to 11 millimeter insert six bus bar cover
plugs into the bus bar protection bracket and fix it to the output cover using two SEMS screw.
Insert output cover assembly through the cables as illustrated in Figure 19.
Figure 19: Three 60V‐100V Units, Wire Diameter
≤
11mm, Output Cover Assembly
Paralleling Cable
Output Cover Assembly
Bus Bar Cover Plug
Bus Bar Protection Bracket
M3 x 8 SEMS Screw, Nickel Plated
Tightening torque: 4.7‐5.7 Lbf‐inch (0.53‐0.64Nm)
Output Cover
