2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
Installation
8
Assembling the UbiquiSTAT
Before assembly, check that no wiring interferes with the cover, and no bare wires are exposed. Follow the instructions
below. You can also refer to a video illustrating the assembly process by clicking
STEP 1
Match the orientation of the internal connectors.
The top connector runs horizontally and the
bottom connector runs vertically.
STEP 2
Gently seat the front cover onto the base, checking
the alignment on all four sides.
STEP 3
Starting on the right side of the unit and using
both hands, snap all four corners of the cover
into place.
Do not force the cover onto the unit!
If it does not easily snap into place, check to make sure the internal connectors are properly aligned and
reassemble the unit.
NOTES:
If the screen does not light up:
• Check that there is power to the base
• The internal connectors may not be fully engaged. Carefully remove the cover and reassemble
If the screen lights but relays or inputs/outputs are not working:
• The internal connectors may not be fully engaged. Carefully remove the cover and reassemble
Touch Screen Interface
The home screen provides at-a-glance system information and
basic user controls. The navigation automatically returns to the
home screen and the display dims after 10 minutes of inactivity (no
touches detected).
1
2
3
4
5
6
7
8
9
10
11
12
No.
Description
1
Room Temperature and Setpoints
2
DI Setpoint Setback Active Indicator
3
Information Text (from connected sensors)
4
Settings Menu
5
Status Screens
6
About Screen
7
Service Status Indicator
8
Display Banner (Device Name and Date/Time)
9
Fan Operation Indicator
10 System Status (Heating/Cooling)
11 Economizer Status*
12 Occupancy Status
*Available only on the 4040/4140 and 4050/4150
