Text Entry
The LT-50 has a text entry interface that is used to fill out text-based
fields. Whenever the throttle requires text input, it will display the text
entry interface. An example for naming a loco in the roster is shown
(A)
.
Within the text entry interface, the knob or left thumb switch adjusts the
position of the highlighted character. Move the cursor to the first char
-
acter you want to enter, then use the button to ‘Add’ that character.
If you make a mistake, you can delete a character using the backspace
thumb switch button . You may navigate through your entered text us
-
ing the direction button.
The right thumb switch moves the cursor up or down one whole line at a
time. The right thumb switch also advances the cursor to other pages of
characters. To quickly switch between uppercase and lowercase letters,
use the Shift key.
A fully-entered loco name is shown above
(B).
Letters and special char-
acters can all be entered with the text entry interface. Numbers do not
display within the text entry screen and can be entered directly with the
throttle keypad.
When you have finished entering text, press Save or Enter .
Flashlight
The LT-50 features a built-in flashlight with two ultra-bright LEDs. To turn
the flashlight on and off, press menu then button 0. The flashlight
feature can also be programmed to any of the
Programmable Buttons
.
A.
B.
9