TCS LT-50 Скачать руководство пользователя страница 19

Страница: 19 / 20

Factory Reset

If for any reason the device encounters a problem that it cannot recover from, the LED

flashlight blinks a diagnostic code, which may be helpful to TCS support. If you encounter

this condition, it can be cleared by removing power.

In the event that a power cycle of the LT-50 does not solve the problem, a factory reset

may be performed. Navigate to

Menu > Settings > Factory Reset

. Performing a factory

reset will erase all user settings and roster data. If you want to back up your roster data,

see the Complete Guide for instructions.

Copyrights and Trademarks

The LCC logo is a registered trademark of the National Model Railroad Association.

RailCom® is a registered trademark of Lenz Elektronik GmbH.

RailComPlus® is a registered trademark of Electronic Solutions Ulm GmbH & Co.

JMRI® is a registered trademark of Robert G. Jacobsen.

Any unattributed copyrights and trademarks are unintentional and should be brought to the

attention of Train Control Systems, Inc. for correction.

Warranty Information

Train Control Systems, Inc. warrants this product to be free from defects in workmanship

and materials, under normal use and conditions, for a period of one (1) year from the origi-

nal invoice date. Please visit our website for additional warranty information.

Support and Contact

If you experience issues with your LT-50, or would like to speak with a technical support

representative, please contact us.

[email protected]

(267) 733-3408

NOTE: the Serial port field will likely be different on your computer

This example shows typical settings. Your configuration may vary.

Содержание LT-50





















Результаты поиска

Содержание LT-50

Отзывы:

TCS LT-50, Быстрый старт, Страница: 19 / 20

Результаты поиска

Содержание LT-50

Отзывы: