07/2015
7
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
Mail: [email protected]
ISW3030-0140 UK 2 A
Connect the lines (2-wire technique)
Minimize the length of the lines above the
lower cover to place the lines without any
problems and do not clamp the lines when
snapping-on the upper cover.
Connect the lines according to the label-
ling: a b E P (from the bottom to the top),
floor push button at a
– E.
See wiring diagram on page 9.
Snapping-on the upper cover
Set on the upper cover at both adjustment
increment of the lower cover (
1
).
Snap-in the upper cover below with slight
pressure (
2
)
Open the device
There is a rectangular release opening at the underside
of the device. Insert a small screwdriver straight and
with slight pressure into this opening.
The upper cover can be removed at the underside (
1
).
Lift the upper cover out of the two upper adjustment
increments (
2
).
1
2
1
2
floor push button
