TCM FD35C9, Руководство по ремонту

Страница: 9 / 291

1-1
1.1 SAFETY INSTRUCTIONS
1.1.1 Introduction
■
Lift trucks should only be operated by qualified
operators
(1) A qualified operator must have training and possess any required
licenses to operate this truck.
(2) The operation of a crane or performing any welding must be only
attempted by qualified personnel.
■
Make a good plan
(1) Perform all service and inspections as planned.
(2) Any worker who is fatigued, feeling unwell, or intoxicated must not
be allowed to do this work.
(3) Locate the correct cause of any problem.
■
Keep the work area clean and orderly
(1) Make sure the work area is organized before starting to service the lift
truck.
Arrange the tools and replacement parts so they can be reached easily.
(2) Avoid working in a hazardous or cluttered area.
(3) Wipe up any oil, grease, or water in the work area. Do not work on an
incline.
(4) Before starting to service the lift truck, make sure there is no one
around the truck except a guide or helper.
1.1.2 Protective gear
(1) Wear all the protective clothing and personal safety gear devices
called for by the job conditions, such as a hard hat, gloves, safety
shoes, safety glasses/goggles, and other.
(2) Shirts and pants should have tight cuffs.
(3) Wear a rubber apron and gloves when handling corrosive material.
(4) Do not touch electric devices or power tools with wet hands.
(5) Keep sparks and open flames away from the work area. This is
especially important if your clothing is contaminated with a lubricant.
(6) Do not put a knife or any other sharp object in your pocket.
(7) Do not wear any jewelry, such as rings, pendants or bracelets, that
can become easily entangled in the machinery. Entanglement causes
serious personal injury. Do not wear a necktie or a watch.
(8) Do not wear gloves when checking rotating parts.
(9) Wear a safety belt when working in an elevated location.
(10) Keep your shoes clean, free of grease, oil, and mud.
1.1.3 Organize the work area
(1) Select a flat work area that is wide enough for the job.
(2) Organize the work area before starting to service the truck.
(3) Clean up any water, oil or grease on the floor. Take all necessary
measures to prevent accidents from slipping, such as by sprinkling
sand on the floor surface.
Hard
Hat
Work
Clothes
Safety
Shoes