TCL RT41VS-EU, Руководство по обслуживанию

Страница: 15 / 59

Test and Alignment Specification for RT2841 Series (v0.01).docx
Page 10 of 27
2. Product Assembly (PA): Test & Alignment
2.1.Factory Menu &
Main Menu\

How to Enable Factory hotkey
Follow the below steps to pop-up the Factory menu in case of “
Factory hotkey
” is disabled:
Enable Factory hotkey method:
Method one:
- Press RCU “
MENU ” key to display main menu
- Select “Settings

Picture

Advanced setting

Contrast”, Scroll down to “
Contrast
” item
- Press the subsequence RCU keys “ 9 ”, “ 7 ”, “ 3 ” and “ 5 ”
- Select “ 9-Sita P mode ”, Press RCU “◄/ ► ” key change the values to ON
- Reboot TV
- 'Factory Hotkey' will be ON automatic.
Method two:
- Create a file named '
sita_P ' with no suffix, note the capitalization.
- Put the file 'sita_P' into the U disk, delete all PKG and BINC files.
- Put the U disk into the TV.
- Power on TV by AC, at the same time press “power on” key which on the boardfor 10s until the TCL logo show.
- 'Factory Hotkey' will be ON automatic.
If “ Factory hotkey ” is enabled, just press RCU “ Return ” key
（ ）
to pop-up again the Factory menu.
The status of “
Factory hotkey
” can be changed in “
Factory menu
->
Factory hotkey
”
Press RCU “ OK/► ”key to enter the submenu.
Press RCU “ Menu ” key to go back to the root menu.
Press RCU “◄/ ► ” key to change the values.
Press RCU “ OK ” key run the function.
Press RCU “
Exit
” key exit the Factory menu.

Factory Captions Description
While “Factory hotkey” is enabled, there’re some toggled display information (~2s) relative to SW, ProjectID,
CI+, Network ID to facilitate 100% quick screening without accessing to whatever else menu:
MV (Main SW Version)
ID (Project ID)
Panel ID
MEMC (FRC SW Version)
MID(Internet info for factory)
P (Production/Factory mode flag) / S (Factory UART Parser mode flag) / W (Warm-Up mode flag)
See Appendix
⒀
“Factory Menu Description”