Factory Test & Alignment Specification For MT56-AP Series (V1.0)
17
Appendix 3: Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a
wired or wireless connection.
Connect to a wired network
Attach the TV set to your LAN using cable in three ways:
Connecting the LAN port on the TV to an external modem using a Cat 5 cable.
Connecting the LAN port on the TV to an IP Sharer which is connected to an external modem. Use
Cat 5 cable for the connection.
Depending on how your network is configured, you may be able to attach the TV to your LAN by
connecting the LAN port on your TV directly to a network wall outlet using a network cable. Note that
the wall outlet is attached to a modem or router anywhere in your house.
Select
Home
→ Settings→ Network → Ethernet Settings→IP Settings
, then the TV will obtain IP
address Automatic configuration. In addition, you can set the IP address and password manually.
Connecting to a wireless network
To connect the TV set to your network wirelessly, you need a wireless router or modem and a Wireless
LAN Adapter.
If the TV set is equiped with an internal WiFi module, select
Home
→ Settings→ Network→ Wireless
Settings
, then turn on
Wireless Switch
, select a wireless network and press
OK
to connect.
If you want to connect the TV set to a wireless network by a Wireless High Gain USB Adapter (USB
dongle), select
Home
→ Settings→ Network→ Wireless Settings
, then turn on
Wireless Switch
and
External WiFi
, and select a wireless network and press
OK
to connect.
